To connect your Kaleido roaster to Artisan software, follow these steps:

Install Artisan Software:

Download and install the Artisan software from the official Artisan website.
Connect Kaleido Roaster:

Ensure your Kaleido roaster is powered on and properly connected to your computer using the appropriate USB or serial cable.
Launch Artisan Software:

Open the Artisan software on your computer.

Configure Connection Settings:

In Artisan, go to the “Preferences” or “Settings” menu. Navigate to the “Hardware” or “Serial Ports” tab.

Select the correct port to which your Kaleido roaster is connected. This is usually identified as COM1, COM2, etc., for Windows or /dev/ttyUSB0, /dev/ttyUSB1, etc., for Mac/Linux.

Set the baud rate and other communication parameters as required by the Kaleido roaster (typically, this information can be found in the roaster’s manual).

Select the Roaster Model:

Within Artisan, choose “Add New Device” or “Configure Device.” Select “Kaleido” or the specific model of your Kaleido roaster from the list of supported devices.
Test the Connection:

Once configured, test the connection by starting a roast profile or sending a command from Artisan to the roaster.
Verify that the software and roaster are communicating correctly. Look for updates on the roaster’s display or changes in Artisan’s interface.

Save Settings:

Save your configuration settings in Artisan to ensure they are applied for future use.
Start Roasting:

With the connection established, you can now create and monitor roast profiles using Artisan software.

If you encounter any issues, consult the Kaleido roaster’s manual or Artisan’s help resources for troubleshooting tips.